Home > News > Products News > The maintenance of Lcd Adverti.....
Contact us
Shenzhen Kerchan Technology Co., Ltd.

Fax: +86-755-23327050
Tel: +86-18028734906‬
Headquarters: 7th floor, B Building, Huafeng International Robot Industrial Park, Hangchen Road, Bao'an District Shenzhen,Guangdong, China.  
Factory Address 1: 5th floor, Building B, Shuangjinhui Industrial Park, Fuyong Town, Bao'an District, Shenzhen, Guangdong, China.Contact Now
Latest product


The maintenance of Lcd Advertising Players need to pay attention to the problem

  • Author:Kerchan
  • Release on:2017-07-18
Lcd Advertising Player as the "fifth media" is now favored by all walks of life, but as a high-load operation of electronic equipment, maintenance need to pay attention to what issues?

    1, the amount of voltage should pay attention
In the course of using advertising player, if the voltage is unstable or exceeds the rated range of the power supply, it may cause the chip to burn and stop working, it is recommended not to share power with high-power equipment.
2, do not pull power supply frequency
Not because of the lazy and by way of pulling power supplly to power off, as the advertising player in the process of the operation, the chip, hard drive are running and read information, if immediately pulling power supplyr to force the shutdown easily caused irreparable damage to the hardware.
3, waterproof and moisture-proof anti high temperature
Outdoor advertising player need to pay attention to waterproof moisture, advertising player opportunities in the rain or moisture, will lead to rust or oxidation of the circuit conditions. Indoor advertising player need to pay special attention to the adjustment of indoor temperature, it is recommended for the advertising player around the set aside more than 10cm of cooling space.
4, regular cleaning
Advertising player must be shut down before cleaning, then pulling power supply. When cleaning the surface of the dirt, you should use a soft fabric and a little water to wipe, should not use too much moisture with a damp cloth, to avoid the water into the screen lead to short circuit.